Khobab's first wind turbine is up
“This is a crucial point in the construction of the wind farm and even more pleasing that we are not just ahead of schedule but also on budget” said Kevin Foster, project manager of Khobab Wind Farm.
The wind turbines, which are 100m tall to allow for optimum energy production, take up to three days to erect, weather dependent. The three 53m blades, made from fibreglass reinforced epoxy, are connected to the rotor at ground level before being lifted to the top of the turbine tower. This is a complicated lifting exercise, in which one crane raises the assembled rotor whilst another smaller crane and taglines guide the rotor into the correct position. The heaviest component is the nacelle, which contains the generator and gearbox; and weighs 82.5 tonnes.
This is the same team that was responsible for the installation of the wind turbines at Noupoort Wind Farm and more recently at the adjacent Loeriesfontein Wind Farm. “Working with an experienced crew, makes all the difference,” added Foster.
The site was chosen because of its excellent wind resource, its proximity to national roads for wind turbine transportation, the favourable construction conditions, municipality and local stakeholder support, the straightforward electrical connection into Eskom’s Helios substation approximately 7km south of the site, and studies showed that there would be minimal environmental impact.
When operating at full capacity, the Khobab Wind Farm will generate approximately 563,500MWh of clean renewable energy per year; this is expected to supply electricity to power up to 120,000 South African homes.